Online only

Yaesu - FTDX-5000MP Limited High Performance HF & 6m Transceiver


New product

This new model is based on the highly successful FTDX-5000MP but is supplied without the SM-5000 Station Monitor, enabling us to offer this High-End Transceiver at a very competitive price

More details

3 294,00 €

Product not deliverable for the moment.

More info

Rugged 200 Watt Output Power
The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).

Internal Power Supply
All  FTDX 5000 radios have their own built-in power supply

TWO Totally Independent Receivers
All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only provided by much more expensive radios.

SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)
SSB (2.4kHz BW)
10 kHz SEP.:106 dB, IP3 +40 dBm 
CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm
*VFO-A/Main Receiver @ 14 MHz, IPO1

Super Sharp “Roofing” Filters
Super sharp “Roofing” filters for VFO-A/Main Receiver.
Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)
*300 Hz filte included in the FTDX 5000MP

High Performance Yaesu Custom-designed 32-bit Floating Point DSP
The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.

Variable CW Audio Peak Filter & High/Low-Cut Filtering
Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology. 
- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz 
- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)

True Analog Meter Precision
Enjoy the same Huge Size Metering System as the FT DX 9000 with True Analog Precision and Instant Reaction Time.

New Function Displays for Ease of Operation
Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.

IF Output Available
IF Output (9 MHz) from VFO-A/Main Receiver

Practical Level Indication System for Most Important Settings
The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.
-They can be controlled ON/OFF independently!

Introducing the SM-5000 Station Monitor Bandscope (OPTION)
If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality - the speakers are point at you instead of up into the air above the radio!

Other Valuable Options
- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own personally selected and purchased computer display monitor.
- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)


FT DX 5000 MP Transceiver

Rx Frequency Range  30 kHz - 60 MHz (Operating) 
  1.8 - 29.7 MHz, 50 - 54 MHz (Specified performance, Amateur Bands only) 
Tx Frequency Range 1.8 - 29.7 MHz, 50 - 54 MHz (Amateur Bands only)
Frequency Stability  ±0.05ppm (MP version, after 1 minute @ -10ºC to +60ºC) 
  ±0.5ppm after 1 minute @ -10ºC to +60ºC  
Operating Temperature Range  -10ºC to +60ºC 
Emission Modes  A1A (CW), A3E (AM), J3E (LSB,USB), F3E (FM), F1B (RTTY),
  F1D (Packet), F2D (Packet) 
Frequency Steps  1/5/10Hz (SSB, CW, AM), 100Hz (FM) 
Antenna Impedance 50Ω, unbalanced 
  16.7Ω - 150Ω, unbalanced (Tuner ON, 1.8 - 29.7 MHz Amateur Band) 
  25Ω - 100Ω, unbalanced (Tuner ON, 50 MHz Amateur Band) 
Power Consumption  Rx (no signal)          70VA 
(approximate figures)  Rx (signal present)   80VA 
  Tx (200W)              720VA 
Supply Voltage  AC 90V - 264V 
Dimensions (W x H x D, mm)  462 x 135 x 389 (w/o knob and connector) 
Weight (approx, kg)  21 
Power Output  10 - 200 Watts (CW, LSB, USB, FM, RTTY, PKT) 
  5 - 50 Watts (AM carrier) 
  10 - 75 Watts (Class A: LSB, USB) 
Modulation Types  J3E (SSB): Balanced 
  A3E (AM): Low-Level (Early Stage) 
  F3E (FM): Variable Reactance 
Harmonic FM Deviation  ±5.0kHz/±2.5kHz 
Harmonic Radiation  Better than -60dB (1.8 - 50 MHz Amateur bands) 
SSB Carrier Suppression  At least 60dB below peak output 
Undesired Sideband Suppr.  At least 60dB below peak output  
Audio Response (SSB)  Not more than -6dB from 300 to 2700 Hz 
3rd Order IMD  -31dB @ 14 MHz, 100 Watts PEP 
  -40dB @ 14 MHz, Class A: 75 Watts PEP 
Bandwidth  500 Hz (CW) 
  3.0 kHz (LSB,USB) 
  6.0 kHz (AM) 
  16 kHz (FM) 
Microphone Impedance  600Ω (200 to 10kΩ) 
Circuit Type  VFO-A; Double-Conversion Superheterodyne 
  VFO-B: Triple-Conversion Superheterodyne 
Intermediate Frequencies  VFO-A; 9 MHz / 30 kHz (24 kHz for AM/FM) 
  VFO-B; 40.455 MHz /  455 kHz / 30 kHz (24 MHz for AM/FM)
Sensitivity  SSB (2.4 kHz, 10dB S+N/N) 
            2µV (0.5 - 1.8 MHz, IPO1) 
          0.2µV (1.8 - 30 MHz, AMP2)
          0.125µV (50 - 54 MHz, AMP2)
  AM  (6 kHz, 10dB S+N/N, 30% modulation @ 400 Hz) 
            6µV (0.5 0 1.8 MHz, IPO1)
            2µV (1.8 - 30 MHz, AMP2) 
            1µV 50 - 54 MHz, AMP2)
  FM   (BW: 15 kHz, 12 dB SINAD)  
          0.5 µV (28 - 30 MHz, AMP2)
          0.35 µV (50 - 54 MHz, AMP2) 
  * There are no specifications in frequency ranges not listed * 
Squelch Sensitivity (AMP2)  SSB / CW / AM 
          2µV (0.1 - 30 MHz) 
          2µV (50 - 54 MHz) 
          1µV (28 - 30 MHz) 
          1µV (50 - 54 MHz) 
  * There are no specifications in frequency ranges not listed * 
Selectivity (-6 / -60dB)  Mode                   -6db                            -60dB 
  CW              0.5kHz or better         750Hz or less
  LSB,USB    2.4kHz or better         3.6kHz or less 
  AM                   6kHz or better          15kHz or less 
  FM                 12kHz or better          30kHz or less 
Image Rejection  70dB or better (1.8 - 29.7 MHz Amateur bands, VRF: ON) 
  60dB or better (50 MHz Amateur band) 
Maximum Audio Output  2.5W into 4Ω with 10% THD 
Audio Output Impedance  4 to 8Ω (4Ω: Nominal) 
Conducted Radiation  Less than 4000 µµW 

  Specifications are subject to change, in the interest of technical
improvement, without notice or obligation, and are guaranteed
only within the Amateur Bands. 

Supplied Accessories:

Hand Microphone (MH-31B8)
Remote Control Keypad (FH-2)
AC Power Cord
User Manuals PDF
3 Years




le ft5000mp est actuellement à 55% du prix du lancement.
C'est une opportunité d'acquérir un appareil de cette classe.
Il y a énormément de possibilités pour éliminer du qrm.

Possibilité aussi de travailler en diversity avec 2 rx sur la même fréquence et 2 antennes différentes.
Ainsi diminuer les coups de fading dans certains cas

La commutation rx vers des antennes dédiées réception comme des beverage est directement possible.
Les 200 W sont confortables

La promotion était assez intéressante

Write your review!

Write a review

Yaesu - FTDX-5000MP Limited High Performance HF & 6m Transceiver

Yaesu - FTDX-5000MP Limited High Performance HF & 6m Transceiver

This new model is based on the highly successful FTDX-5000MP but is supplied without the SM-5000 Station Monitor, enabling us to offer this High-End Transceiver at a very competitive price