Scanners

Manufacturers

Online only

ALINCO - DJ-X11E - Scanner receiver

DJ-X11E

New product

Continuous broadband scanner receiver without frequency hops.

– Coverage: 0.05 to 1,299.999 MHz. In all modes.

– Modes: AM / FM / WFM / SSB / CW.

– 2 simultaneous VFOs in Rx.

– 1,200 memories in 6 types of files (banks).

More details

Your current price:
335,00 €
Members of R.E.E.C & a sponsored club:
301,50 €

335,00 €


Product not deliverable for the moment.

More info

Features:

  • 2VFO simultaneous RX
  • Main-band coverage: 0.05?`1,299.99995MHz all mode AM/FM/WFM/SSB/CW (BFO for SSB/CW receive. An external antenna required for practical HF monitoring. Internal bar antenna for AM broadcast reception and earphone antenna feature inclusive.)
  • Sub-band coverage: VHF:118?`171MHz/UHF:336?`470MHz in AM/NFM
  • 1200 memory channels with adjustable memory banks using utility freeware (optional PC cable required)
  • IQ signal and Discriminator output features: DJ-X11 has an IQ signal output that can be used with 3rd-party software to operate as a SDR. 10.7MHz IF discriminator signal can be used with other receiver-related software available on the net such as AIS-plotting.
  • Voice-guidance system reads entering/entered frequency in English
  • Easy-to-use twin dials
  • Pocket size unit measures 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x 4.17 (H) x 1.50 (D) in (without projections)
  • Rigged Polycarbonate body with rubber protectors
  • Selectable tuning steps: 0.05/0.1/1/5/6.25/8.33/9/10/12.5/15/20/25/30/50/100/125/150/200/500kHz/1MHz
  • Various scan modes: Preset, programmed, memory, VFO and tone scan
  • 3 selectable scan speeds (VFO: 25ch/s, 33ch/s, 100ch/s, Memory: 4.5ch/s, 8.3ch/s, 20ch/s)
  • TSQ and DCS decode
  • Wire remote-control using optional EDS-12
  • Long-lasting 1800mAh Li-Ion battery pack provides nearly 15 hours of operation at full audio output in a single RX mode
  • 1200 Alphanumeric (up to 16 characters) memory channels
  • Additional 100 memory channels are available for each Dual-mode memory, Search-pass, Priority monitoring and Programmed Scanning pairs
  • Large, brightly illuminated full dot-matrix LCD and keypads
  • Dual channel-scope (Alinco's patented spectrum-analyzer alike feature)
  • Frequency counter and flash tune
  • "Bug detector" function searches for hidden transmitters
  • Illuminated keypad for comfortable operation
  • Standard Drop-in charger fully charges empty EBP-74 in 4 hours
  • RF gain and attenuator for both main/sub VFOs
  • Analog inversion-scramble decoder***

* Cellular frequencies blocked on T model sold in USA, unblocked K model available in Canada and for authorized US users with proper documentation
* Operating times may vary subject to usage and settings. High-grade alkaline cells recommended.
* Inversion-scramble decoder is available in E-version only

About PC connection:

  • ERW-7 allows you to use clone or utility software only.
  • ERW-8 enables the use of both clone-utility AND real-time control software.

Both types of software are available for download at no charge from a link below. To use 3rd party SDR freeware, you will need to purchase a 3.5mm stereo mini-plug cable for connection to a PC. Functions are not guaranteed when used with 3rd party software. (ERW-4C serial cable is usable as a replacement to ERW-7 but it doesn't support firmware-update operations of DJ-X11.)

Indicative battery duration:

  • Approx. 35 hours (FM, single VFO, AF10% THD, 1 min RX/4 min Stand-by/EDH-36 (with Alkaline cells) or EBP-74)
  • Approx. 15 hours (FM, single VFO, Max AF outputEBP-74)


Specifications

Receiver range: Main VFO 0.05 - 1299.99995 MHz in All available modes / Sub VFO 118 - 170.995MHz & 336 - 469.995MHz in AM/FM (Cellular frequencies 824.000 - 849.995MHz, 869.000 - 894.995MHz blocked on T models. EGR model receives Ham and Broadcast bands only. 225 - 335.995 MHz in AM/FM may be usable although out of specification and warranty)
Mode: FM,WFM,AM,SSB(USB/LSB),CW(CU/CL)
Antenna Impedance: 50 ohms (SMA)
Supply voltage: DC 3.7V (EBP-74) / DC 4.5V (EDH-33) / DC 5.4V - 6.0V (external regulated source) negative ground
Current consumption: approx.130mA Mono band / 180mA Dual band
Temperature range: -10 to +60 dig C (+14 to +140 dig F)
Frequency stability: -7 to +3ppm(-10 to +60 dig C)(+14 to +140 dig F)
Dimension without projection: 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x 4.17 (H) x 1.50 (D)
Weight: Approx.235g / 8.29 oz (Ant.& EBP-74 inclusive)
Receiver: Triple-conversion super heterodyne AM/SSB/CW/FM in Main VFO / Double-conversion super heterodyne AM/FM in Sub VFO and WFM in Main VFO
Selectivity: SSB/CW -6dB: 2kHz or more -50dB : 7.5kHz or less, AM/FM -6dB : 12kHz or more -60dB : 35kHz or less, WFM -6dB : 180kHz ?}40kHz -20dB : 470kHz or less
Sensitivity
(typical value within the band:
10dB S/N:AM/SSB/CW
12dBSINAD:FM/WFM):
Main-band: 0.050~0.531MHz (AM) 5dBu 0.531~1.62MHz (AM) 2dBu 1.62~76MHz (AM) -5dBu 1.62~76MHz (SSB,CW) -10dBu 1.62~76MHz (FM) -15dBu 76~108MHz (WFM) -3dBu 108~136MHz (AM) -6dBu 136~174MHz (FM) -14dBu 175~221.75MHz (WFM) -6dBu 221.8~336MHz (AM) 0dBu 336~475.75MHz (FM) -13dBu 475.75~770MHz (WFM) -13dBu 770~1260MHz (FM) -9dBu 1260~1300MHz (FM) -6dBu
Sub-band: 118~136MHz (AM) -3dBu 136~170MHz (FM) -14dBu 336~470MHz (FM) -14dBu *225~335.995 MHz in AM/FM may be usable although out of specification and warranty. Sensitivity is better closer to 336MHz. This band is closed at the default setting,
Audio Output power: More than 100mW (8ohm)

Specifications subject to change without notice or obligation. Cellular frequencies blocked on USA model. Unblocked versions available with proper documentation for authorized users only

Standard Accessories

Instruction manual / Whip antenna (EA-154) / Li-Ion battery-pack (EBP-74:1800mAh, 3.7V) / Belt-clip (EBC-23) / hand strap / Drop-in charger kit EDC-174A (120V) or EDC-174E (220V) / Dry cell case (EDH-36) * May vary, please ask your dealer before purchase

Download

Firmware download
Software download
Brochure download (PDF:260KB)

Reviews

Write a review

ALINCO - DJ-X11E - Scanner receiver

ALINCO - DJ-X11E - Scanner receiver

Continuous broadband scanner receiver without frequency hops.

– Coverage: 0.05 to 1,299.999 MHz. In all modes.

– Modes: AM / FM / WFM / SSB / CW.

– 2 simultaneous VFOs in Rx.

– 1,200 memories in 6 types of files (banks).