PORTABLE RTX with automatic antenna tuner, 4000 mAh battery, all mode, CW keyer and memory, IF output, large low-power LCD, integrated or external microphone.
This product is no longer in stock
X5105 offers a completely new portable experience with its large 3.6-inch dot matrix LCD display that provides all the vital information easy to read in daylight or darkness. The built-in 3800 mAh battery can power the radio up to 8 hours in reception mode, ideal for outdoor activities.
The highly effective automatic antenna tuner allows you to quickly install the portable station even if the antenna is not perfectly tuned. The tuner stores tuning data at 100 kHz intervals allowing instant tuning to previously tuned frequencies.
The physical shape and controls of the X5105 have been optimized for use in the field. The front panel buttons are backlit to work in the dark and the VFO is optimized for use with the thumb without being sensitive to accidental touches.
The X5105 receiver is a double conversion superheterodyne with a digital base band. A DAC samples the demodulated audio and goes to the high-speed DSP processor. Noise reduction, notch filter and transmission signal processing are all handled by the DSP.
In addition to voice modes (LSB, USB, AM and NFM), the X5105 can also be used in CW with the possibility of storing short CW messages for one-touch field transmission. There is also a modem mode that allows you to decode PSK31 directly on the screen.
The X5105's local oscillator is based on a high-performance DDS, Direct Digital Synthesizer. This provides a pure signal with low phase noise and extended frequency coverage. The high quality oscillator is the basis of the transceiver's performance.
The X5105's stable and reliable push-pull power amplifier circuit offers up to 5 watts of transmission power over the entire HF range and 6 meters.
X5105 has an IF output that is used with the Xiegu XDT1 pan adapter or with any SDR receiver to display a spectrum of color frequencies.
X5105 is housed in a robust case that is both compact and lightweight. It measures only 160 x 100 x 46 mm and weighs 0.94 kg including the battery.
X5105 General specifications
Frequency coverage: 1.0-55 MHz (TX in Ham Bands)
Operating mode: USB, LSB, AM, FM, PSK31 (RX only)
Antenna impedance: 50 ohms
Supply voltage 13.8 VDC +/- 15%
Current consumption: RX 660 mA or lower, TX 2.5 A or lower
Operating temperature: from -10C to + 60C
Frequency stability: 2 ppm in 60 min
X5105 receiver specifications
Structure: Double Conversion Superheterodyne + Digital baseband processing
IF frequency: 70.455 MHz, 10.695 MHz
SSB / CW / FM sensitivity: 0.25 uV
AM sensitivity: 2 uV (10 uV, 5-1.79 MHz)
SSB selectivity: -6 dB 2.4 kHz, 60 dB 4.6 kHz
CW selectivity: -6dB 500 Hz, 60dB 2000 Hz
AMSelectivity: -6 dB 6 kHz, 60 dB 25 kHz
FM selectivity: -6 dB 12 kHz, 60 dB 25 kHz
Image suppression: 70 dB
IF suppression: 60 dB
Audio output: 0.6 Watt @ 4 Ohm 10% THD)
X5105 transmitter specifications
Output power:> 4.5 Watt SSB,> 1.5 Watt AM Carrier
SSB modulation type: balanced modulation
AM modulation type: modulation of the low level amplitude
FM modulation type: variable reactance
Spur reduction:> 45dB
Carrier suppression:> 40dB
Spurious sidebands:> 50 dB
SSB frequency response: 400-2800 Hz (-6 dB)
FM Max Swing; +/- 5kHz
Mic External impedance: o, 2-10k
Antenna Tuner Storage Points: every 100kHz interval
Antenna tuning time: less than or equal to 10 seconds
X5105 General specifications
Dimensions: 160 x 100 x 46 mm
Weight: 0.94 kg
In the box:
X5105 radio unit complete with ATU and rechargeable battery
Microphone with remote keyboard
Serial cable for PC connection
12 Volt power cable
Xiegu Service Card