Perfect combination both with the Xiegu X5105 X108G G1M G90 and with the Yaesu FT-818 or Elecraft K3X
This product is no longer in stock
The XPA125B amplifier has a gain of 13 dB which makes it the perfect amplifier for a 5 watt transmitter when 100 watts of power is needed.
The XPA125B's automatic antenna tuner and power amplifier can be used independently of one another , it's basically like buying two devices in one. The tuner manages loads of 14-500 ohms in the HF 1.8-30 MHz bands in the 6 meters (50-54 MHz).
The XPA125B has a variety of intelligent protection circuits to ensure the safety of the amplifier and the connected transceiver. When abnormal operating conditions occur such as SWR too high, too much drive power or too high temperature, the amplifier goes into bypass mode and displays an alarm message.
The large backlit LCD display shows input and output power, SWR, voltage, current, temperature, amplifier status and warning messages that make the use of this modern amplifier simple and intuitive.
XPA125B has automatic band selection via the accessory connection directly compatible with the G90, X5105 and X108G transceivers. The optional CN-20 interface can also be used to connect a Yaesu FT-817 and FT-818, or the manual section is also available using the BAND buttons on the front panel. The ACC connector also accepts a PTT input and the ALC input.
A serial connection allows you to connect the XPA125 to a PC for firmware updates.
XPA125B has been approved by the FCC and is CE marked.
Frequency range: 0.5-54 MHz
Maximum output power: 1.8-30 MHz> 100 W / 50 MHz> 80 W
Maximum environmental operating temperature: 55 ° C
Gain: 13 dB (+/- 2dB)
Spurious suppression:> 50 dB
Supply voltage: 12-15 Volt DC
Current absorption transmission: @ max output 30A
Receive current consumption: @ max 700 mA
ATU frequency range: 1.8-30 MHz and 50-54 MHz
ATU tuning range: 14-500 Ohm
Dimensions: 260 x 160 x 70 mm (excluding knobs, feet, handles, etc.)
Weight: 2.66 kg (Shipping weight 4 kg)
In the box
XPA125B 100W linear power amplifier
Control cable for Xiegu X108P transceiver
12 volt DC power cable
USB cable for PC connection
English user manual
Xiegu Service Card