Online only

YAESU - FTDX-10 - HF/50 MHZ - 100W


New product

Full Tx
5 years warranty

Like the FTDX-101 series, the new FTDX-10 utilizes the Yaesu Hybrid SDR configuration

More details

By buying this product you can collect up to 14 loyalty points. Your cart will total 14 loyalty points that can be converted into a voucher of 14,00 €.

1 479,00 €

Product not deliverable for the moment.

Pay it by wire
and save an additional 10,35 €

More info

Frequency Ranges: RX 30kHz - 75MHz (Operating)
    1.8MHz - 29.699999MHz (Specified Performance, Amateur bands only)*
    *5.351500 - 5.366500 MHZ (EU only / B2)
    50MHz - 53.99999MHz (Specified Performance, Amateur bands only)
  TX 1.8 - 54MHz (Amateur bands only)
Modulation Type:   A1A(CW), A3E(AM), J3E(LSB,USB), F3E(FM), F1B(RTTY), G1B(PSK)
Frequency Stability:   ±0.5ppm (32°F to +122°F/0°C to +50°C, after 1 min)
Supply Voltage:   DC 13.8V ±15%
Circuit Type:   Double-Conversion Superheterodyne
Intermediate Frequencies:   1st IF 9.005MHz
    2nd IF 24kHz
RF Power Output:   5W - 100W (CW, LSB, USB, FM, RTTY, PKT)
    5W - 25W (AM)
Case Size (W x H x D):   10.47 x 3.58 x 10.35 (inch) - 266 x 91 x 263 (mm)
Weight (Approx):   13lbs/5,9 KG

Hybrid SDR Configuration

Narrow Band SDR and Direct Sampling SDR.

The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope.

Narrow Band SDR with 3 types of Roofing Filters and Phenomenal Multi-signal receiving Characteristics

Like the FTDX-101 series, the Down Conversion type receiver configuration with the first IF at 9MHz has been adopted.  It makes it possible to incorporate excellent narrow bandwidth crystal roofing filters that have the desired sharp “cliff edge” shape factor.  Thanks to the Narrow Band SDR with the latest circuit configuration including 500Hz, 3kHz and 12kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109dB or more in the 14MHz band at 2kHz separation.

250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords Quiet and Clear Reception

The local circuit of the new FTDX-10 uses 250MHz HRDDS method same as the FTDX-101 series.  Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145dB or less in 14MHz at 2kHz separation.

3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel Functionality

The 5-inch Full-Color panel shows the 3DSS display.  By touching the frequency display, the numeric keypad is displayed, and the active band and frequency adjustment can be set by direct input.  Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display.  Similar to the FTDX-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available.

Front Panel Designed for Superior Operating Efficiency
MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels.

Remote Operation with optional LAN unit (SCU-LAN10)

Remote operation of the transceiver is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network.

The features of the new FTDX-10 include:- HF/50MHz band 100W Transceiver

- Hybrid SDR configuration utilizing a Narrow Bandwidth SDR and a Direct Sampling SDR
- Narrow Band SDR enables Phenomenal Multi-signal Receiving characteristics (2kHz RMDR 116dB+, 2kHz BDR 141dB+, 2kHz 3rd IMDR 109dB+)
- Down conversion, 9MHz IF Roofing Filters produce Excellent Shape Factor
- 250 MHz HRDDS (High Resolution Direct Digital Synthesizer) Ultra Low-Noise Local-Oscillator System
- 15 Separate Powerful Band Pass Filters (BPF)
- High-quality and Super-Stable Final Amplifier utilizing the new push-pull MOSFET RD70HUP2
- 5-inch Full Color Touch Panel and 3DSS (3-Dimensional Spectrum Stream) Display
- MPVD (Multi-Purpose VFO Outer Dial) enables Outstanding Operating Performance
- Quick Memory Bank (QMB)
- Supports CW operation with multiple functions such as: CW zero-in, CW Auto zero-in, CW Reverse, CW decode, CW keying Signal form Shaping by FPGA and others
- RTTY (FSK)/ PSK Encode/Decode Function
- Other practical features such as Optional RF Gain Selection by IPO. Automatic Gain Control, Quick Split Function
- SD Card Slot
- Remote Operation via Internet with optional LAN-Unit (SCU-LAN10)

Supplied Accessories:

Microphone SSM-75E
DC Power Cable w/Fuse
Spare Fuse
6.3mm 3-contact Plug
Operating PDF Manual




Trés bon petit poste , je dis petit car il a remplacé mon FT2000 , mais méfiez vous du micro d'origine MADE IN CHINA , il y a un soucis de blindage , je l'ai refait car il aurait fallu le renvoyer a l'importateur (un coup de scalpel de la colle et hop il était refais , les filtres sont sensationnels et assez facile a paramétré , seul petit reproche le N.B qui déforme la réception une fois mise en service
73'S Prenez soins de vous

  • 3 out of 3 people found this review useful.

Write a review

YAESU - FTDX-10 - HF/50 MHZ - 100W

YAESU - FTDX-10 - HF/50 MHZ - 100W

Full Tx
5 years warranty

Like the FTDX-101 series, the new FTDX-10 utilizes the Yaesu Hybrid SDR configuration